Harbor Freight Tools Automobile Accessories 46087 User Manual

Creeper  
with adjustable headrest  
Model 46087  
asseMblY aNd OperatiNG iNstruCtiONs  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our web site at http://www.harborfreight.com  
Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
 
9. use the right tool for the job. Do not attempt to force a small tool or  
attachment to do the work of a larger industrial tool. There are certain  
applications for which this tool was designed. Do not modify this tool and do  
not use this tool for a purpose for which it was not intended.  
10. stay alert. Watch what you are doing, use common sense. Do not operate  
any tool when you are tired.  
11. Check for damaged parts. Before using any tool, any part that appears  
damaged should be carefully checked to determine that it will operate  
properly and perform its intended function. Check for alignment and binding  
of moving parts; any broken parts or mounting fixtures; and any other  
condition that may affect proper operation. Any part that is damaged should  
be properly repaired or replaced by a qualified technician.  
12. replacement parts and accessories. When servicing, use only identical  
replacement parts. Use of any other parts will void the warranty. Only use  
accessories intended for use with this tool. Approved accessories are  
available from Harbor Freight Tools.  
13. do not operate Creeper if under the influence of alcohol or drugs. Read  
warning labels on prescriptions to determine if your judgment or reflexes are  
impaired while taking drugs. If there is any doubt, do not operate the creeper.  
14. Maintenance. For your safety, maintenance should be performed  
regularlyby a qualified technician.  
warning:the warnings, cautions, and instructions discussed in this  
instruction manual cannot cover all possible conditions and situations  
that may occur. it must be understood by the operator that common  
sense and caution are factors which cannot be built into this product,  
but must be supplied by the operator.  
unpacking  
When unpacking, check to make sure the parts listed on page 4 are included. If  
any parts are missing or broken, please call Harbor Freight Tools at the number  
on the cover of this manual.  
Operation  
1. If you raise the vehicle to work under it, set the vehicle on jack stands. Do not  
work under a vehicle raised on a jack. If the vehicle is on the ground, block the  
tires, set the parking brake, and put it in gear or Park.  
2. Adjust the headrest using the adjustment lever (#5) down to 0 degrees.  
Keep your head flat on the head Cushion (#4) while you slide under the vehicle,  
then adjust the head Cushion (#4) to a comfortable angle.  
3. Lower the head Cushion (#4) to 0 degrees to slide the Creeper out.  
SKU 46087  
Page 3  
 
Note: Maximum weight Capacity is 250 lbs.  
.
Maintenance  
1. Wipe down cushions with a damp cloth.  
2. Clean off any grease or debris which accumulates on casters.  
3. Check hardware and tighten if necessary.  
assembly drawing  
4
3
1
5
2
parts list  
Part No.  
Description  
Frame  
Casters  
Body Cushion  
Head Cushion  
1
2
3
4
5
6
Qty (6)  
Adjustment Lever  
Hardware (not shown)  
please read the FOllOwiNG CareFullY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM  
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER  
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO  
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PROD-  
UCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT  
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTI-  
FIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES  
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL  
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER  
INSTALLATION OF REPLACEMENT PARTS THERETO.  
NOte: Some parts are listed and shown for illustration purposes only and are not  
available individually as replacement parts.  
SKU 46087  
Page 4  

Greenheck Fan Ventilation Hood SSFSDR 512 User Manual
Hasbro Games 51673 User Manual
Heat Glo LifeStyle Indoor Fireplace AT ZC User Manual
Heath Zenith Work Light 52 4473 6 User Manual
Hotpoint Microwave Oven MW33N H User Manual
HP Hewlett Packard Computer Drive 8505 8 mm User Manual
HP Hewlett Packard Personal Computer VoodooDNA 803 User Manual
Huawei Cell Phone G7002 User Manual
Husqvarna Edger 326SX Series User Manual
Husqvarna Snow Blower 1330SBEXP User Manual